1911Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
104 Posts
Discussion Starter #1
I need help with getting some load data for a 175g LSWC for 40SW using Titegroup. Called Hodgon todat and they stated That I should not use lead in my 40cal. and that they did not even test it with lead bullet for 40cal.
I also need data for Berrys 150g and 180g FP and 200g LTC if anyone can help out. I would like to use Titegroup but have 231, No.5, and Unique on hand.

Thanks for any help,
Todd
P16-40 Limited
 

·
Registered
Joined
·
252 Posts
Lead bullet loads

The Lazer Cast manual I'm using lists a 170 lswc and AA#5. Starting load is 5.5 gr AA#5, max is 6.1 gr. Assuming you are a USPSA shooter the same manual lists loads using Titegroup but using a long OAL strictly for Limited shooters.
180 gr lead, 4.2 gr Titegroup, OAL 1.190. 960 fps.
180 gr lead, 4.6 gr Titegroup, OAL 1.190. 1016 fps.
Paul
 
1 - 2 of 2 Posts
Top