1911Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Hi there,

Info:
Custom 1911 frame/slide/barrel from Heavy Armor Division, Government .45ACP.
Using 16lb recoil spring, 23lb mainspring.
Had minor hiccups in the beginning due to extractor. Then I fixed that issue, and it's ran 500 or so rounds without any hiccups.
Took it to the range today, and it could barely get through 100 rounds without having this exact issue illustrated below:
Air gun Trigger Shotgun Gun barrel Gun accessory


I think this is a double feed? Again, It's ran 500 or so rounds without issues and only today I had this problem, using several mags, both mecgar and wilson mags. Same ammo as I've always used before that did not have problems.

Thanks for the help!
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #13 ·
So I took it to the range again, after wiping down my mags making sure they were dry. I used a 17lb recoil spring instead now of the 16lb. Shot 200 rounds through it with the same Russian steel ammo: 0 failures.
Thanks
 
1 - 4 of 4 Posts
Top