1911Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
249 Posts
Discussion Starter · #1 ·
what are the items that are in the 2% non-compatible with colt's? thanks
mcole
 

·
Registered
Joined
·
144 Posts
I believe that in a recent post,the Daly rep stated that the grip screws were all that were not compatible.The rep also stated that this was in the process of being changed also.
 

·
Registered
Joined
·
116 Posts
The magazine catch is also not. Replaced the mag catch on my Kimber with an oversized one, no problem. Decided to put the Kimber catch in my Daly since the button is a little longer. No can do. The tab on the mag catch lock is a little closer/farther away from the end of the catch, don't remember which but it's different. Stock/aftermarket mag catch won't fit.
 

·
Registered
Joined
·
249 Posts
Discussion Starter · #4 ·
so firing pin, firing pin lock, extractor, ejector, would all be interchangeable with colt or wilson's would also fit? handle screw bushings aren't particularily relevant. mine is fs model built in early 2000. thanks
mcole
 
1 - 4 of 4 Posts
Top