1911Forum banner

223 and 9mm in a Dillon 550- Same shell plate?

671 Views 4 Replies 5 Participants Last post by  tlafrance
I noticed that the 9mm and the 223 have case heads that are very similar in size. Would the same shell plate in a Dillon 550 work for both? In a single stage press, the 40 and the 9mm use the same shell holder but it is sized in between the two. The head on the 223 is slightly smaller than the 9mm and will not work with the 9mm/40 shell holder.
1 - 5 of 5 Posts

· Registered
Joined
·
9 Posts
.223 shellplate = .380 shellplate.
Different locator buttons and powder funnel though


Tom

------------------
"Those who live by the sword, get shot by those who don't"
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top