1911Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
After my previous question from which I got a lot of great feedback. I'm now thinking about taking this complete lower

http://www.palmettostatearmory.com/i...-magazine.html

and putting one of these uppers on it.

http://www.bravocompanyusa.com/BCM-S...-missg2-15.htm

http://www.whiteoakarmament.com/xcar...cat=259&page=1

but don't know which one is better so i'm going to need some help from you guys on that. But I was also thinking about taking this incomplete lower

http://www.palmettostatearmory.com/i...ire-lower.html

and putting this kit on it.

http://www.palmettostatearmory.com/i...rifle-kit.html

But I don't know if I should take the first option or the second. What do guys think I should do?
 

·
Registered
Joined
·
1,345 Posts
A BCM upper on a Palmetto lower would be a good setup. Your BMC link doesn't work, and you PSA links just take you to their main page though. I would personally take a BCM over a White Oak upper any day of the week.
 

·
Registered
Joined
·
8,321 Posts
I would go with the White Oak upper based off of the info you posted in the last thread. A 18 or 20 inch Wylde chambered barrel is a nice option.

That upper, any lower with a nice stock and a Geissele trigger would make a sweet varmint/SPR rifle.
 

·
Registered
Joined
·
1,345 Posts
I tell you what, especially with the Leupold Mark AR and mount makes this a hard upper to pass up.

http://palmettostatearmory.com/inde...8-ss15g2-premium-with-leupold-mark-scope.html

Solid Ranier Arms bolt carrier group on sale for $109.95.

https://www.rainierarms.com/?page=shop/detail&product_id=3759

BCM Gunfighter Charging handle $34.99 to finish it off.

https://www.primaryarms.com/Bravo-Company-5-56-223-Charging-Handle-Mod-4-p/bcmgunfighter4.htm

Or a cheaper charging handle for $19.77.

https://www.primaryarms.com/Basic-AR-15-Charging-Handle-p/pa-kit-ch.htm
 

·
Registered
Joined
·
1,992 Posts
I'm guessing for the PSA lower your wanting this is the one

http://palmettostatearmory.com/inde...wer-magpul-moe-edition-black-no-magazine.html

Good deal, I would get one myself but I bought 2 stripped lowers yesterday :p (plus I have a couple complete lowers here needing uppers 1st).

BCM upper of your choice will be fine. I used a PSA lower I built on my BCM 16" middy when I first did it and it matched up nicely. The only reason I moved the lower to a different upper was I had a PSA upper on a Spikes lower and figured the PSA stuff made more sense matched.
 
1 - 8 of 8 Posts
Top