1911Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
125 Posts
Discussion Starter #5
"But sir, the barrel bushing is on the barrel, that's all" :cool: :cool: :cool:

I traded a P7, Ruger 40 carbine, and tons of extras for it few years ago. Found it on gunsamerica serial # 3 :rock:
 

·
Registered
Joined
·
3,232 Posts
Cjblackmon said:
No, unfortunately they're pretty anal at IDPA and it has to have a barrel bushing.

Killer gun though!!!!! Where did you find it???
I thought under 4" the barrel could be a bull barrel..

nice gun...

Did if come from Fred Craig..or from the Briley Custom shop??
 

·
Super Moderator
Joined
·
13,522 Posts
eerw said:
I thought under 4" the barrel could be a bull barrel..
That is correct.
 

·
Registered
Joined
·
1,006 Posts
That is correct.
That is not correct. One could use a Wilson Professional legally in IDPA even though it uses a bull barrel 4.15 inches in length. The rule book only prohibits bull barrels that are 4.2 inches or longer. You could legally use a bull barrel that is 4.15 or 4 inches in length.
 

·
Super Moderator
Joined
·
13,522 Posts
Thanks for clarifying the barrel length issue. I was only referring to this particular pistol, which looks to be 4" or less. Actually, checking at another website indicated that this pistol has a 3.6" barrel.
 
1 - 12 of 12 Posts
Top