1911Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
949 Posts
Discussion Starter #1
I’m closing in on 5000 rounds in my Springers and am curious as to what to replace the stock firing pin springs with. I’ve only had the TGO since the middle of November, but the count is at 4370 and climbing. The TGO has a titanium firing pin (if this makes a difference). Midway carries a Springfield titanium firing pin with an extra power spring. In my Colt’s I’ve always used extra power type springs like Wilson’s. I assume this is the same for the Springers? Advice please.
 

·
Registered
Joined
·
207 Posts
About 225 rounds ago I replaced the recoil spring in my (titanimum FP) .45 cal Loaded Model with an extra power 18.5 # recoil spring from Wolff Gunsprings. As I'm sure you know, Wolff includes an extra power firing pin spring free with the extra power recoil spring. Both springs seem to be working fine.
 
1 - 3 of 3 Posts
Top