1911Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
162 Posts
There should be daylight between the tip of your extractor and the case bevel. File or sand it down until there is clearance. It should take 4 1/2 lbs to slide the case out of the extractor, or tightly retain an empty case and barely retain a loaded round. Do a search here on how to bend the extractor.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top