1911Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
Hey guys,
I picked up my MC operator a few days ago. Finally shot it yesterday and had some questions. There is a bit of trigger creep( I guess thats what it's called) compared to the other 1911 I had. I hear the ILS or whatever system Springfield employs can hinder trigger pull. I was wondering what was involved in removing the system? Is it something I can do myself, or do I have to take it to a smith?

I fired about 200 rounds without a problem, other than I can't get used to the trigger pull.

Thanks
 

·
Registered
Joined
·
2,731 Posts
Changing it out is EASY. Just get new mainspring housing innards, and either put them back in the old housing or (preferrably) get a new one. It's a drop in part.
 

·
Registered
Joined
·
12 Posts
Discussion Starter #3
Changing it out is EASY. Just get new mainspring housing innards, and either put them back in the old housing or (preferrably) get a new one. It's a drop in part.
Sounds easy...however I am really new to 1911's. Can I get a main spring housing from wilson combat or some other manufacturer? What do you guys recommend?
 
1 - 4 of 4 Posts
Top