1911Forum banner

Is there a full d.i.y. 1911 kit?

1118 Views 26 Replies 18 Participants Last post by  AutomaticMonk
I’ve just started down the Gunsmithing rabbit hole, got the itch you might say.
I’ve found a few component suppliers and will be researching their products while working on a budget for a concealed carry custom 1911.
When I built my first AR, there was no shortage of full build kits, you supply the lower and they supply every part, screw, and spring to make your rifle. Is there such a thing in the 1911 world? For a very first project it’s sort of nice to have the full roadmap, less chance of non-compatible or unsuitable parts.

My other option would be to start with a positively reviewed production pistol and modify till my hearts content.
  • Like
Reactions: 1
1 - 2 of 27 Posts
Post # 6 says it all. You are also going to need to buy quite a few tools and learn how to use stones and files to build a 1911. Can you file and stone surfaces square and parallel to each other with out using jigs and guides? No? Then you will need to get them as well. Read the Kuhnhausen Shop Manual first. Now read it again.... NOW you're on your way down the hole Pilgrim.
  • Like
Reactions: 1
Read the entire Kuhnhausen book. Now read it again. Knowing this stuff will prevent you from buying parts you don't need and making other expensive mistakes.
1 - 2 of 27 Posts
Top