1911Forum banner
1 - 1 of 9 Posts

· Registered
3,171 Posts
I've done a lot of Pin Shooting and I use only JHP bullets. When one uses cast or plated solid bullets and you get hits on the side of the pin most of the time it will just knock the pin over. What I've found with JHP bullets if you hit the pin on its side most of the time the bullet will bite the pin, turn into the pin and spin it off the table. Also you want to keep in mind that if you are going to shoot on regulation tables its best if your loads are making a power factor of 200 or better. I'm shooting a 210 power factor out of my All-Sport Forty using a 135 gr JHP bullet. If you get a chance view the video on my web site. Hope to see you at some of the pin shoots.
Regards,Bob Hunter. www.huntercustoms.com
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.