1911Forum banner

Lee Turret selection and setup help

8863 Views 88 Replies 22 Participants Last post by  olgutshotwilly
So I have decided to get a lee turret. What do I need to get with it. Which lee turret should I get? I figure a 4 hole turret. Set of dies. But what extra stuff should I get? Case feeder? Which powder measure, which primer system, etc. Just want to know what stuff is worth getting and what is superfluous.
1 - 2 of 89 Posts
You want the CLASSIC turret IMHO, not the Deluxe. A very complete setup is sold as a kit for about $200. Just add calipers, dies and components. The Pro Auto disk dispenser works great as does the Lee on press priming system.. I added a $30 digital scale to help my tired old eyeballs. A reloading manual or two would complete the list of 'must haves' if you are reloading pistol.

A tumbler and media is nice to clean range brass. A Wislon case Gage for each caiber is also a plus. On My Classic turret I have a separate turret setup with dies for each of the 4 calibers I reload. Lee stuff is very affordable making this an easy process.

Be sure to check out the great Lee self-help videos plus youtube:

http://leeprecision.com/turret-press-help-videos.html
Classic offers a more robust casting of steel vs aluminum, heavier duty lever and ram and the spent primer recovery system is superior. The spent primers go down a clear tube rather than just falling into a well in the base casting.
1 - 2 of 89 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top