1911Forum banner
1 - 1 of 10 Posts

· Registered
464 Posts
Originally posted by EdGCNM:
With TiteGroup the chamber fouled really badly; with W231 fouling is moderate but a good amount of powder is ejected unburned. Thanks!
On really light loads, the case mouth doesn't seal well against the chamber upon firing the round. This allows gases and powder residue to blow back into the chamber.

I would try Alliant Bullseye for reduced bullseye loads. The cases will be a bit sooty, but the unburned powder seems to be at a minimum.

A slow hit beats a fast miss
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.