1911Forum banner

Mil Spec 38 Super

1135 Views 5 Replies 5 Participants Last post by  BK
Was wondering if anyone here has one of these guns or has had the opportunity to look over one in their local gunshop?

I was thinking it may be a good candidate for a 9X23 conversion? Any opinions?

How expensive is it to have Heinies or Novak night sights installed on the Mil-Spec Springfields? Any estimates?

All opinions will be appreciated.

Thanks.
1 - 6 of 6 Posts

· Registered
Joined
·
27 Posts
I have seen one of these guns. The overall fit and finish looked good.
As a candidate for 9x23 it would be great, because 38.super is the easiest caliber you can convert to 9x23.
If you really want some qualified answers(not saying you wont find them here)you should also post this over at www.pistolsmith.com under the "9x23 discussion", or you could post it under "custom makers".

You should also consider contacting Dane Burns as he is the guru of 9x23mm.
His homepage is www.9x23win.com.

NB. Dane Burns i also posting on pistolsmith.

Good luck with your quest...

[This message has been edited by Springfield No.1 (edited 08-15-2001).]

[This message has been edited by Springfield No.1 (edited 08-15-2001).]
 

· Premium Member
Joined
·
2,057 Posts
Originally posted by Springfield No.1:

You should also consider contacting Dane Burns as he is the guru of 9x23mm.


NB. Dane Burns i also posting on pistolsmith.
There are many Smiths that post on this board that are very qualified to put together the 9x23 Many. You can do a search and find pictures of work relating to the 9x23.

and sure dane posts on his board, he owns it.
not a big surprise there.

geo ><>
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top