1911Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
166 Posts
Discussion Starter · #1 ·
I need a new recoil spring for my 6" Perfect 10. What is the stock poundage spring. I shoot full house loads through it and the spring is lite. At 3000 rounds the primer is backing out or flatting. Anyone have replacement part numbers for springs by wolff or one of the other spring makers?
 

·
Registered
Joined
·
293 Posts
I need a new recoil spring for my 6" Perfect 10. What is the stock poundage spring. I shoot full house loads through it and the spring is lite. At 3000 rounds the primer is backing out or flatting. Anyone have replacement part numbers for springs by wolff or one of the other spring makers?
Try a FPS with a smaller radius, to tune for hotter loads. You probably don't need more spring, to return the slide.

I am a little envious, I wish I got to shoot mine that much.

The Perfect 10 as it leaves the factory uses a standard 5 inch length 20lb Wolff spring.
Feel free to call our Tech support if you need any help- 512-819-0656
:)
Thanks for the info and thank you for you presence here on the forum.

What weight mainspring is used originally?

I will catalog the info and refer to it when I am in need of new spring(s)
 
1 - 3 of 3 Posts
Top