1911Forum banner
1 - 1 of 1 Posts

·
Banned
Joined
·
51 Posts
Discussion Starter · #1 · (Edited)
Well as all of you may know that i am putting a new kart barrel in my tle-ll. yesterday i went to the range and shot 150rds with 3 nose down feed ramp jams, and 2 fte and 2 ftrb. Last night when i got home i broke the gun completely down and cleaned the living heck out of it. I got to thinking that since i got this new barrel that i can now do some work on the stock kimber barrel. So i polished the barrel throat to a mirror finish as well as the feed ramp. i also extended the feed ramp and broke the edge at the bottom at the feed ramp as well as the underside of the barrel hood. I just got back from the range after shooting 100rds and not a single hiccup. the last 20 rounds i fired in a very fast manner trying to get the gun hot to see if it would fail and she just chewed em up and spit them out.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top