1911Forum banner

Recoil spring for Concept 7?

787 Views 1 Reply 2 Participants Last post by  shane45-1911
This is the first 1911 I've owned without a 5" barrel. What would be the correct spring wieght be for a 4.25" gun using 230 gr. full power loads. Also where is a good source to get the correct springs?

Info appreciated!!
1 - 2 of 2 Posts

· Banned
Joined
·
13,763 Posts
Commanches come standard with 21 lb. springs. This factory weight spring should be fine to use. I personally use 20 lb. springs in all my 4 1/4" guns with good results.

Wolff springs are the best, IMHO. You can get them thru Brownell's www.brownells.com or Wolff directly. www.gunsprings.com
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top