1911Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
89 Posts
Originally posted by vandal:
The Kimber slide stop on my Compact CDP was giving me fits. It had discolored badly and was popping up on a loaded mag.

I bought an Ed Brown slide stop to replace it. Unfortunately the slide stop notch on the Kimbers is too wide, and while the Ed Brown will lock the slide back on empty, the part of the stop that engages the notch is too narrow to allow a slingshot/overhand release of the slide -- it never touches the front of the slide stop notch. I have to use the slide stop to release the slide.

Can anyone recommend a stainless replacement stop that will work with the Kimber?
I replaced mine with a EGW slide stop, drop in, works like it should.
Jack
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top