1911Forum banner
Status
Not open for further replies.
1 - 20 of 114 Posts

·
Registered
Joined
·
137 Posts
Discussion Starter · #1 ·
I've been making some custom 1911 grips in my shop.

You can send me a concept or sketch, and I'll translate it into a 3D relief on the grips. I can do a 3D preview for your approval before making them.

Multiple wood choices are available, or send me your material. Most grips are around $100, depending on the complexity of your design.

I'm considering upgrading to "merchant" status, and I am just gauging interest....

Thank you,

Ron
R M H Knives
RMHKnives.com
[email protected]
RMH ~ NES Forum
 

·
Registered
Joined
·
137 Posts
Discussion Starter · #27 · (Edited)
To those submitting requests for grip designs :

I disassociate myself from anything which has any demonic, satanic,
or other inappropriate thematic elements which would displease
the Lord Jesus Christ.

Spiritual warriors know this :

For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness,
against the spiritual forces of wickedness in the heavenly places. Therefore, take up the full armor of God, so that you will be able
to resist in the evil day, and having done everything, to stand firm. Ephesians 6:12-13

Be of sober spirit, be on the alert. Your adversary, the devil, prowls around like a roaring lion, seeking someone to devour.
But resist him, firm in your faith, knowing that the same experiences of suffering are being accomplished by your brethren
who are in the world. 1 Peter 5:8

Submit therefore to God. Resist the devil and he will flee from you. James 4:7

Ron
RMH Knives
RMHKnives.com
[email protected]
 

·
Registered
Joined
·
137 Posts
Discussion Starter · #34 · (Edited)

·
Registered
Joined
·
137 Posts
Discussion Starter · #39 ·
The inserts actual.
Numrich (HERE) and a few other places have these available.

If you wanted to order the originals and send them to me to embed into grips,
I can do that. Or, I could order the ones you prefer myself...either way.

Also, I could machine some custom ones from brass and do this in house if you
didn't mind them "non-original."

Ron
RMH Knives
RMHKnives.com
[email protected]
 

·
Registered
Joined
·
137 Posts
Discussion Starter · #40 ·
Can you do Manufactures insignia's? Wouldn't be for resale, just my own guns. PM me if you need more specifics.
Bob
Sure. Check out Post #15 in this thread for the Dan Wesson
compact grip set I just did for remanez.

PM me with whatever you had in mind and I'll get back to you.

Ron
RMH Knives
RMHKnives.com
[email protected]
 

·
Registered
Joined
·
137 Posts
Discussion Starter · #41 ·
Can you do 'thin' grips? Will they have enough material to do engraving in them?
Yes. The ones I just finished for serpentine in post #29, in this thread,
are custom thin grips. There's plenty of depth in these for machined reliefs.

Ron
RMH Knives
RMHKnives.com
[email protected]
 

·
Registered
Joined
·
137 Posts
Discussion Starter · #50 ·
But can you do reverse airfoil grips?
If you need a model for the reverse airfoil profile, I'd send you a pair.
I have had a few ideas for new grip profiles based on how knife handles fill
the hand. If there is a demand for "teardrop" profile grips, it will be
one more welcome "iron in the file" for me.

Again, comments and suggestions are encouraged.

LW McVay - Thanks for the offer. If I need them, I'll contact you.

Ron
RMH Knives
RMHKnives.com
[email protected]
 

·
Registered
Joined
·
137 Posts
Discussion Starter · #52 ·
I've got some regular air foils if you need pics and measurements.
Thank you. I appreciate the offers....

Maybe the height dimensions (thicknesses) at the front and back edges
would be good for me have, to check against my CAD models.

As all hands are different, I can vary these dimensions individually as needed.

OliverBox - check your eMail...

Ron
RMH Knives
RMHKnives.com
[email protected]
 
1 - 20 of 114 Posts
Status
Not open for further replies.
Top