Today I went to shoot my MKII and had about 150 rounds fired,I loaded some remington viper rounds and fired a couple,One of the rounds had lodged in the barrel and didnt fire,I pulled the live round out and loaded another this time when I pulled the trigger I had no trigger pull.
I then pulled the mag and unchamberd the round and tried the trigger again,nothing,no trigger break nothing,It was alomost like I had never pulled the bolt back.
I went to take it apart and it was locked up like fort knox,I had to tap the the ball on the main spring housing to get it apart,actually had to hit it hard to get it apart ,once I did this and free'd the mainspring housing I put it back together and it would then work when I pulled the bolt back and pulled the trigger.
It looks like there is 2 chips in the main spring housing at the handle latch in the main spring housing.The chips are in a v shape,and when I tried to dis assemble it this piece did not want to budge,when I tried to pull it out it was trying to pull back in.
Does anyone know how this could have happend?
I sure could use your help so I could avoid this problem again.
P.S The 150 rounds I had fired were Federal hp bulk pack if this helps with anything.
Also the main spring housing latch will not close all the way while in the gun,when I have it pulled from the gun it will close.
Thank you in advance.
I then pulled the mag and unchamberd the round and tried the trigger again,nothing,no trigger break nothing,It was alomost like I had never pulled the bolt back.
I went to take it apart and it was locked up like fort knox,I had to tap the the ball on the main spring housing to get it apart,actually had to hit it hard to get it apart ,once I did this and free'd the mainspring housing I put it back together and it would then work when I pulled the bolt back and pulled the trigger.
It looks like there is 2 chips in the main spring housing at the handle latch in the main spring housing.The chips are in a v shape,and when I tried to dis assemble it this piece did not want to budge,when I tried to pull it out it was trying to pull back in.
Does anyone know how this could have happend?
I sure could use your help so I could avoid this problem again.
P.S The 150 rounds I had fired were Federal hp bulk pack if this helps with anything.
Also the main spring housing latch will not close all the way while in the gun,when I have it pulled from the gun it will close.
Thank you in advance.