1911Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
The safety doesn't work properly on my older model Auto Ordnance 1911. Pushing up on the safety with the hammer cocked, it only moves about half way, and there is resistance to further movement. The safety will fully engage if the hammer is pushed fully back. I looked at the safety, and it doesn't appear to be worn or broken.
Thanks in advance for any help!
 

·
Registered
Joined
·
850 Posts
This is the job for a competent gunsmith.

The safety should fully engage when fliped to the up position.

Don't take a chance, have it looked at ASAP.

------------------
ACK

"Make the First Shot Count"!
 
1 - 2 of 2 Posts
Top