1911Forum banner
1 - 1 of 27 Posts

· Registered
472 Posts
The safety needs to be fitted to the sear , It is not a drop in part !!!

From what you say it is contacting the sear on both the safety on and off positions , since you said the hammer will not fall when in the off safe position.

Put the original safety on and get a gunsmith to fit the new one if you desire.
This could be dangerous if not fitted correctly.
1 - 1 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.