[ruffdup]

Lots of Tisas here... let's see em!

 

[geen]

Ill start with my duty 45
Grips are form Texas Grips ([email protected])
made from americian holly - a wood that looks like ivory. I Had my smith do a trigger job and work on the safety as it was not very positive but now has a nice positive click.

 

[ruffdup]

Hale yeah! Don't forget to list mods..

 

[theraptur]

deleted to page 2

 

[Retired AF CE]

Ill start
View attachment 619710

That’s pretty sweet.

 

[Oldpistol]

9 mm “Duty” converted to .38 super. RIA barrel, Wilson FPS and extractor, Wolfe springs (recoil spring for .45 acp, 23 lb main spring). Ed Brown long solid aluminum trigger, 4.2 pound trigger, .190 narrow tenon front sight and 10-8 rear ledge rear sight. I had to shorten the 9 mm ejector and may shorten it a bit more. Wanted to be able to eject live rounds. I can with most brands. Mag catch spring needed trimming. Magazine catch needed some smoothing. Ed Brown magazine.

 

[Magnumite]

Slightly modded…most parts are original with only tuning and truing. I invested a barrel bushing, link…that’s it, IIRC. 45 ACP…
ETA: That is the original slide stop. I was a sear and mainspring I had to replace. Replacement grips, though.

 

[Oldpistol]

Great job. How many hours do you think?

 

[Magnumite]

Thanks. Time…thinking out loud…

About 5-6 hours on flattening/contouring the mainspring housing and all stippling. Over an hour on the grip safety. About .5 hours bobbing the hammer. One hour on thumb safety. Barrel, bushing about 3.0 hours. IIRC, I had to lower the barrel bed and put in a bowtie cut. Getting slop out of trigger fit, correct hammer hooks, and action work about 4 hours. Took about 1 hour on front sight.

I guess that is about 16 hours. Took a couple days. Time flies when one is having fun.

 

[Magnumite]

Oldpistol, the sight onyour pistols is one of my favorites for the military spec dovetail.

 

[ruffdup]

Less than 200rds and so far the log man slide stop mod is it. Shoots great. The fit and finish is impressive. Love this gun.

• SS forged frame and slide
• .45acp
• 8+1
• 4.25 barrel
• ambi
• white dots
• raised front strap
• lowered and flared
• beveled mag well
• rail
• chamfered slide stop hole
• front serrations
• Oh,wait. All that was straight from the factory
• $700 otd @ TX lgs

Spits faster than my ex

 

[ruffdup]

... Time flies when one is having fun.

The stippling looks great, definitely prefer it to checkering.

 

[Magnumite]

Thank you.

Sometimes at the range I shoot 4 guns. All 1911’s…22,9, 45 and ???

 

[Kwc271]

Here is mine, only mod is genuine US 1911A1 grip panels.

 

[uncle grinch]

Since this is a Tisas Pic thread, here is my Carry model with an Andrews holster…

 

[Zack856]

Here's my 9mm army. Looks grey out here but under fluorescent light it looks green. Mods are Fusion thin bushings and Cold Steel thin grips, filed down a tiny sharp spot on the grip safety where the web of my hand sits, and polished the ramp a hair to feed hp's reliably out of the box.

 

[jlhog1]

Altamont Wood Grips Wilson Combat Magazines (2) Wilson Combat 1911 Plunger Tube Assy 821B Wilson Combat Extended Slide Release Wilson Shok Buffer & Spring

 

[Retired AF CE]

Here's my 9mm army. Looks grey out here but under fluorescent light it looks green. Mods are Fusion thin bushings and Cold Steel thin grips, filed down a tiny sharp spot on the grip safety where the web of my hand sits, and polished the ramp a hair to feed hp's reliably out of the box. View attachment 619833 View attachment 619834 View attachment 619835

Are these Cerakoated or parkerized?

 

[Oldpistol]

Tisas “tanker”. 4.25” .45 acp. It shot high. Rear sight was taken down and the notch re filed. Ed Brown long aluminum trigger. Slicked up the MIM hammer, sear, disconnector. Bobbed the hammer as it gave me hammer bite. It exhibited ammunition and magazine sensitivity. Much of that was in rather deep tooling marks on the under surface of the rear barrel hood. It had a tight chamber with insufficient leade for SWC target loads. I reamed it and polished it. As of this morning, it is accepting of virtually all loads and different magazine types. Hybrid mag lips, parallel mag feed lips, 7 round, 8 round, ball, hollow points, SWC, doesn’t seem to matter. I may put a narrow tenon tritium front post sight on it paired with a 10-8 rear sight. And different grips. Wilson FPS and extractor are in it.

 

[Zack856]

Are these Cerakoated or parkerized?

Cerakoated