1911Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
225 Posts
Discussion Starter #1
Hope this fits...

I recently purchased a set of Zebrawood stocks from ebay and am waiting for their arrival. They are to replace my S-A milspec's plastic factory stocks. From the descripture I believe they will be smooth.

So, how do I care for them? Do I oil them or polyurathane them?

Thanks for the info.

Regards, -Coop
 

·
Registered
Joined
·
348 Posts
KPS,

Watco Danish Oil is a good product. Get the "natural" color if you just want a clear oil.

Hope that helps.
 

·
Registered
Joined
·
4,305 Posts
Brownells sells a clear spray epoxy for wood (and another for metal). Go to; www.brownells.com

Stock# 083-070-012
WOOD-ACRA-COAT
12 oz. aerosol
$10.69

Or...

Renaissance Wax - not cheap, but alittle goes a long way. Super stuff for wood, metalwork, leather and about anything else.
Go to site http://shop.woodcraft.com
Click on Online "Catalogue", then "Finishing", Then "Wax".
 
1 - 8 of 8 Posts
Top