Is that a commander? Flatwire or traditional 🤔

 

It’s a 4” (semi-commander). Just had it apart to clean……traditional if I recall.

 

The list of springs shown below was posted by Keith from Dan Wesson. It is a sticky in the Dan Wesson sub-forum.


Updated 5/13/2019


All Chrome Silicon Recoil Springs
(all weights are approximate, they can vary slightly)

5" & 6" .45 18.0 lb
5" & 6" 10mm 22.0 lb
5" 40 S&W 18.0 lb
5" 38 Super 12.0 lb
5" 9mm 10.0 lb

4.25" .45 20.0 lb
4.25" 10mm 24.0 lb
4.25" 38 Super 14.0 lb
4.25" 9mm 12.0 lb

4" .45 Flat wire 22.0 lb
4" 9mm Flat wire 13.0 lb

3.5" .45 Flat wire 22.0 lb
3.5" 9mm Flat wire 18.0 lb

These are all standard springs. No variable springs.

Full sized mainsprings 18.0 lb

Officer and bobbed mainsprings 23.0 lb

Firing pin springs
Extra

 

Thank you!

 

Curious what type of malfunctions you are having

 

It’s having feeding and failure to return to battery issues.
Last night I found both stock mags followers are garbage and polished a small burr on the disconnector. It seems to not hang up anymore.
I’ll take it to the range this week and only use Wilson mags to see where it stands.

 

Lorde B.,

If your mags are new, load them up and let them sit for a few days to let the springs set. (Just in case you have not done so.) This will sometimes solve feeding issues on new guns.