I got one just like it from them a couple of weeks ago. Great price and good folks to deal with! Shoot you should buy them a beer they did ya a favor!

 

Lol don’t know how they would react to me carrying a case a beer in 😂. I’ll let them know the love they get on here next time I’m over lol. Yeah I always hit them up first before driving anywhere else. They have great prices on a lot of stuff in there. Hope you enjoy your new one man

 

Who produces them? Never heard of the stakeout.

 

They are from Tisas.

 

Went to get ammo for my detective special yesterday and family firearms twisted my arm. I was like I’m just coming for ammo. They shoved a raider and a stakeout in my hand and just forced me to buy this stakeout. Can you believe that 😉? Anyways went and shot it (only 56 rounds because that’s all I could part with). It shot great except 2 hang ups on some cheap 185gr hp I had. Once it’s broke in well I’ll use it as a carry gun.

Also obviously joking about family firearms. I live pretty close so I swing by and check out what they have from time to time. Great people there so give them support

Sweet !

So..this is another STAKEOUT....without the rollmarks !

Very interdasting....

Wonder if the Stakeout/Service Special/etc guy might have either fell off the wagon or maybe got himself fired.
Or...maybe Tisas is seeing their sales slide on some of these wonky rollmarks and their customers are preferring less...except the 1911A1....maybe.
Who knows...

 

I think the more recently made ones don't have the Stakeout rollmark the one I got was mfg in 2022 and has the rollmark. I would have preferred it not to have it but it won't make any difference in how it shoots.

 

Yeah the slide on both sides is just bare. Probably wouldn’t get it if it had a big banner

 

I am curious as there are two Stakeout models it appears, the Cerakote and the Tennefer. Which one is the OP's?

 

Mine is most def cerakote

 

Bare slides are cool. No need for billboard advertising.

 

Went to get ammo for my detective special yesterday and family firearms twisted my arm. I was like I’m just coming for ammo. They shoved a raider and a stakeout in my hand and just forced me to buy this stakeout. Can you believe that 😉? Anyways went and shot it (only 56 rounds because that’s all I could part with). It shot great except 2 hang ups on some cheap 185gr hp I had. Once it’s broke in well I’ll use it as a carry gun.

Also obviously joking about family firearms. I live pretty close so I swing by and check out what they have from time to time. Great people there so give them support

Nice business-like looking pistol. It's got the features I would want without a bunch of stuff I don't. I love their walnut grips - I've bought them for some of my other guns.

 

Less rollmarks are better

 

Nice gun !

Kodi​

 

Stakeout...down to $329.99 or $332.95...depending on version/vendor...IDK what the difference is..didn't look too much....plus the $20 ride.
I think the prices might be starting to drop a bit...maybe a few trying to get a share of the pre-Black Friday market.

https://gun.deals/search/apachesolr_search/723551442319 =Cerakote

723551441305 - SDS Imports 1911 A1 Stakeout .45 ACP 1911A1 STAKEOUT 45 =Black QPQ Tenefer

 

SDS informed me that there are two different STAKEOUT models. The Cerakote model has STAKEOUT stamped on the slide whereas the Tenefer model does not per customer requests.

 

Great info to know ! Thx for posting this.

 

In my opinion, that is one of the better looking models available right now. If it had a Novak’s style rear sight, it would be just about a perfectly appointed Government Model. Congrats!

 

...If it had a Novak’s style rear sight, it would be just about a perfectly appointed Government Model. Congrats!

Novak Designs Inc. - Product Detail - Installation - Direct Replacement w/ Minor Machining for Rear Sight - $70.00

 

I didn’t know the Stakeout had a brass bead on the front sight. So in the Tenifer finish it’s basically an economy version of the MAC 1911. Probably the best value in a Tisas. Not certain I would like the extended trigger in my extra large hands. I need to go to FF and check one out. Never been there. Three hour drive. Thank you for the post.

 

...Not certain I would like the extended trigger in my extra large hands...

But, it has a flat MSH.

 

Where is this Family Firearms Located at. I need to go there so they can rough me up and make me buy a Tisa's. This will be a new excuse of buying a 1911. I am a sucker for about any 1911.

 

Troy Alabama

Home | Family Firearms

www.familyfirearms.com

 

I just emailed FF 3 hours ago and got a response already. They are out of the Stakeout in Tennifer.

 

Here’s an update. Only at 206 rounds now. Enjoying it. Had a couple last round ftf last week shooting a box of 50. Adjusted extractor to see if it will help. Had 1 in the 100 I shot today. Will carry it when it breaks in and is 100 percent. But been practicing dry fire with it so it’s already starting to show some wear. Think it’s gonna be a fun gun

 

Here’s an update. Only at 206 rounds now. Enjoying it. Had a couple last round ftf last week shooting a box of 50. Adjusted extractor to see if it will help. Had 1 in the 100 I shot today. Will carry it when it breaks in and is 100 percent. But been practicing dry fire with it so it’s already starting to show some wear. Think it’s gonna be a fun gun View attachment 700516
View attachment 700515

Very sharp. Is this the new Parkerized finish?

 

yes, fine looking pistol. Hmmm. Do I need the features of the JSOC? . Hmmmmm

Here’s an update. Only at 206 rounds now. Enjoying it. Had a couple last round ftf last week shooting a box of 50. Adjusted extractor to see if it will help. Had 1 in the 100 I shot today. Will carry it when it breaks in and is 100 percent. But been practicing dry fire with it so it’s already starting to show some wear. Think it’s gonna be a fun gun View attachment 700516
View attachment 700515

Where did you acquire this one? This is better the the MAC to me. No ambi safety, brass bead front sight, Tenifer finish, extended trigger beaver tail. Much cheaper.

 

He got it at FF. UPC: 723551441305 has a Tenifer finish . They have none right now

 

I love it too, but am digging the rear adjustable on the JSOC. Is it worth that much difference though? Besides the sight, the JSOC has different grips, magwell, and textured front strap. Anything else?

 

• Carbon Steel Forged Frame and Slide
  416R Stainless Match Barrel w/ 11° Crown
  Colt® Series 70 Based Internals
  Titanium Firing Pin
  Lowered & Flared Ejection Port
  QPQ Tennifer Finish
  Rear Slide Cocking Serrations
  25LPI Checkered Frame
  Flat Mainspring Housing 25LPI Checkering
  MAC Logo Turkish Walnut Grips
  Bomar Cut LPA Adjustable Rear
  Brass Bead insert on Blade Front Sight
  Skeletonized Hammer
  Skeletonized Adj. Trigger
  Ambidextrous Safety & Extended Magazines Release
  Extended Beavertail Grip Safety & Competition Magwell
  Available in .45ACP
  Premium Owners Kit (2 Magazines, Cleaning Kit, Lockable Rugged Case)

stakeout
Frame: Forged Carbon Steel, Full-Size Ramped
Slide: Forged Carbon Steel, Government Length
Caliber: .45ACP
Barrel: 5" Cold Hammer Forged
Internals: Colt® 70 Series
Sights: Enhanced A1 Style Sights/Brass Bead Insert Front Sight
Grips: Turkish Walnut
Finish: QPQ Tenifer Frame/Slide
Weight: 2lb 5oz

 

People, remember that Tenefer (Tenifer) is a metal treatment and not a finish.

Metal Treatments: Ferritic Nitrocarburizing/Melonite/Tenifer

In the last few posts, we looked into metal treatments like plating , parkerizing and bluing . In this post, we will study a newer form of ...

firearmshistory.blogspot.com

 

I'll add to this by telling about my new Stakeout. It isn't the newest version but I didn't find any MIM parts while doing some trigger work. I shot it last week to verify that it functioned properly, which it did (6 1/2# trigger). I t has Mecgar magazines BTW.

Then I stoned and polished the hammer and sear (Harrison Design TR), installed a short trigger and tuned the springs so it now breaks around 3 1/4-3 1/2#. Now it shoots great and feels like an old friend! I will test it for accuracy soon and look further at the barrel bushing, which measures around .003 clearance using calipers. I ordered an outside mic and a set of telescoping gages to get better numbers for this.

So far I am really enjoying this gun!

Richard