1911Forum banner

XS Big Dot Sights - Who uses 'em besides me?

4.8K views 38 replies 31 participants last post by  Paulskj  
#1 ·
I first discovered these about 15 years ago. My eyesight was starting to get worse (I've worn glasses for the past 55 years), and it was getting harder to discern the sights on my CZ-75B. I ordered a set and mounted them on the gun. It took a little while to figure out how to "dot the I", but when I did I started putting more bullets on target. I never considered myself as a competitive shooter; when I go to the range I'm only concentrating on making "lethal" shots. I don't care how many get in the 10 ring, I just want be accurate enough to stop the threat. With these Big Dot sights, you just put the dot where you want the bullet to go, and it does the rest.

I've since put them on my ATI Titan FX-45, and also on my S&W Model 610 10mm revolver and my S&W Model 69 44 Magnum. I just purchased 3 Magnum Research 1911s (3", 4.5" and 5") as well as the Bul Commander 1911 in 9mm I'm waiting to hear back from Bo at XS Sights as to what models go on each gun, and I will be outfitting those with the DXT2 sights.

Who else here is using them, and what are your opinions of them?

Jim
 
#2 ·
I put one of these on a Ruger WC SP101:
The brass bead dot that came on the gun kept popping out at range sessions with full load .357 rounds. I like it.
 
#4 ·
I have them on a couple and there’s a bit of a learning curve. I also had trouble with customer service, my front Big Dot sight on a Smith and Wesson Performance Center 1911 fell apart. The barrel part of the sight fell off leaving the bottom part still in the notch. I called the factory and the guy was very polite, he asked me to measure certain things, I complied the best I could and then “radio silence“ I even sent him an email and asked if he forgot about me, no response.
 
#7 ·
I just noted in another thread, I have the Ameriglow fronts and Wilson/Vickers Black Tactical U notch rears on 2 Grey Ghost Precision slides and I really like the sight picture I have. Fast to get on target and accurate to boot. I had the XS Big Dot sight on a Marlin 45-70 and it was very fast to bring to bear on target and accurate as well.

I like them and will eventually swap over to them as my factory sights go dim.
 
#8 ·
Like trooper894 I put a set on my Kahr P380. I had a hard time hitting anything with them. Five years ago I finally started reloading for the .380 and started shooting my Kahr seriously again. Once I figured the sights out my groups shrank and my love for the gun, the reloads and especially the sights really grew. I put them on a Kimber Commander and find them very fast and easy to see. Great for older eyes.
 
#17 ·
I put them on all my duty guns for 21 years, along with my EDC off duty firearms. Sig 226 and 229, Glock 21, 41, 36. They gave me the fastest combat shooting of any sights I tried, and I did a lot of testing. I like the Big Dot tritium front, and non tritium rear. Not everyone liked them, but most officers shot better under stress with XS Big Dot on the service pistol compared to standard sights.
 
#18 ·
I hate them. I put a set on a 1911 about 15 years ago and went through a LEO instructor course with them. I was also shooting IDPA regularly at the time, so I knew what to expect from myself in terms of speed and accuracy. I didn’t measure any speed advantage at close range, and my accuracy really suffered. I promptly went back to my standard: tritium front post sight with white target ring and plain black wide notch (.130 - .140 inch) rear.
 
#22 ·
I used to use them a lot. Then they stopped making the REGULER size white outline F/S for many models. Started to make big, orange-colored front ones. Not accurate for more than 5-10 yards. Just like everything else, have a good thing then screw it up. Gave up on them completely and now for N/S, Amera-glo or Night fission sights. 100 times better.
 
#23 ·
"When in tight, front sight". They are great sights for use within 25' of your target.
 
#26 · (Edited)
i use xs big dots on all my glocks, a colt defender and a ruger gov.

he didnt have anything for my sig c3 unfortunately. need to check if he has something for the s&w perf center 9mm

i definitely shot big dots better than conventional sites for defense type shooting. more accurate and faster on target.

i use xs big dot offsets on a scoped AR15 too.