I decided to go with a kit from egw. Again thanks for your post.

 

I just put the same trigger group in my Fusion Build and found the parts to be High Quality. I found the fit & finish to be very nice and the price was very reasonable.

 

Man that sucks he didn't send replacement parts.

Thanks for the reply

 

your welcome!
all i have ever heard about fusion firearms was good things... i may be the odd duck out there that fell through the cracks. if you go with fusion i hope it works out well for you. if not, then i still hope it works out well. i have a custom fusion build that should be in the final stages now and i will be sure and post up a range report once i get the gun. happy shooting!

 

That's the exact kit that I put into my Fusion build. I didn't have any issues at all with any of the parts. There was no damage to anything, and no twist on the trigger bow. I put a 400 stone to the sear just to be sure it was smooth, and even all the way across. I also made sure the hooks on the hammer were square, which they were. Came out pretty nice.

Just my .02

Smitty

 

http://store01.prostores.com/servlet/fusionfirearms/the-283/Trigger-group-1911-dsh--Com/Detail

this is the kit i ordered and installed on my rock. it took a lot of work to make it work but it looks ok and it works ok. hopefully you will have a better experience. ive had much better luck out of the box with cylinder and slide, wilson combat, and knight hawk. check this link out for all the details.

http://forums.1911forum.com/showthread.php?t=428646

p.s. i never did see a replacement kit from bob... just saying...