1911Forum banner

Necked down 45ACP

3 reading
2.6K views 6 replies 6 participants last post by  glider  
#1 ·
I know about the 400 Corbon but I was wondering if anyone has ever been crazy enough to neck down a 45ACP to 9MM. I may get a 400 Corbon barrel. I have no idea why, it just seems like it would be fun. Thanks
 
#3 ·
There is indeed a .38/45 wildcat. Years ago I had a gunsmith set up a 1927 Argentine to use multiple calibers by swapping slides, barrels, springs & mags. One of the calibers he threw in was a .38/45 and included the reloading dies. Forming a case is as easy as running a 45acp case through the .38/45 sizing die. I've always thought that it would approach .357 Magnum power although after some 30 years I've still not actually used it.
 
#4 ·
I have 400 Cor-Bon barrels in my Glock 21 and Gersan 1911 45. Fun to reload, easy to find brass and bullets (just bought 240 new Starline brass on GunBroker for $40). Started out necking down 45 ACP brass, but would split after 2-3 reloads because of the higher pressure in 400 C-B, then tried 45 ACP+P which worked fine, but the Starline stock brass is your best bet. Also tried small pistol primers, then tried small rifle (Remington) which has a little more noticeable recoil. Sierra 6th manual has load data for the cartridge, very similar, within .1-.2 grains, of 10mm with the same bullets (135, 155, 165 grain). Mostly use WSF powder, but have used AA#7 and HS-6. Die sets are easy to find, have Townsend (carbide), Hornady, RCBS, Redding, and Lee. I use a 45 ACP carbide sizer first, then the 400 C-B sizer for the neck down so no lube needed. Get a barrel for your 45 handgun and have a nice shooter!
 
#7 ·
Is a 400 Corbon harder on the frame than a 45ACP? I am trying to decide what pistol to get a barrel for. A steel frame 5 inch gun or an aluminum frame compact. The full size would be the better choice but the compact would be the most fun I bet.